09-03-2013 02:14 AM - edited 03-16-2019 07:10 PM
Hi Guy,please take a look to the picture attached .
I can't find the Find button to be able to search for directory numbers,instead of uing the drop down list.
I have this button in different cucm servers other than this one i am working with now.
09-03-2013 03:10 AM
Ahmed,
That is strange. What version of CUCM is this?
Have you tired using another browser? eg ie or chrome?
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-03-2013 05:04 AM
To be honest, I've never seen a search field on that page, in no version I've visited.
Simply typing in the directory number field the number you are searching, it displays if exists.
HTH
Regards
Carlo
Please rate all helpful posts
"The more you help the more you learn"
09-03-2013 05:06 AM
Carlo, there is a "Find" that allows you to search for directory numbers to add for your BLF speed dials
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-03-2013 05:14 AM
Aok.
This is an 8.6 of one of my customers.
Where is the find you are talking about?
Please rate all helpful posts
"The more you help the more you learn"
09-03-2013 05:21 AM
Carlo,
Here is mine on CUCM 8.6.
I think it depends on the amount of DN that you have. If your DN exceed the amount that can be seen in the drop down menu, then the find button appears
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-03-2013 05:26 AM
Yes.
This could be the possible cause. +5P Aok
THX
Carlo
Please rate all helpful posts
"The more you help the more you learn"
09-04-2013 01:56 AM
Hi Carlo.
Yes there should be find button.
09-04-2013 01:55 AM
Hi aokanlawon
Tried but all browsers does not show .CUCM 9.1.I used it for other customers and i have find there.
09-04-2013 02:08 AM
Ahmed, did you read my post above
Here is mine on CUCM 8.6.
I think it depends on the amount of DN that you have. If your DN exceed the amount that can be seen in the drop down menu, then the find button appears
It depends on how many Extensions you have.
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-06-2013 03:39 AM
May be you are right.
01-13-2014 06:16 AM
Hello Community, I notice the same issue at the enduser configuration.
Please see this thread
https://supportforums.cisco.com/message/4136032
I can´t find anything in srnd etc.... regarding the limit.
For doublecheck I would increase the count of Deviceprofiles.
From which limit the "find button appears"?
HTH, please rate all useful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide