We have a customer who wants to block caller-ID on a per-call basis. This is for outbound calls placed via an ISDN PRI circuit. Same configuration as above:
caller-id block code *55
ephone-dn 39 dual-line
When he dials *55 and then an external number, the caller-ID still shows. Interestingly, when he dials a 4-digit internal DN, the call comes in as private, regardless if he dials the number with or without the block code of *55.
From what I've read on CME system guide, the blocking of the CLID is supposed to happen only if the block code is used, and it should work on both internal and external calls, but we're getting very strange results.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4