Block incoming numbers on gateway

[simonmossman]

Hi all

Can anyone advise if there is a way to block unwanted calls coming into our gateway. I have done this on a H323 GW using a translation rule and explicit  "block this number" . We are running MGCP on this box and using CUCM 6.1.4

Any ideas??

[paolo bevilacqua]

This is asked frequently and you would find the answer with a simple search.

There is no way to do that with MGCP.

[Rob Huffman · Accepted solution]

Hey Simon,

This type of Call Blocking is still not supported with MGCP

These documents were nicely posted up by Java recently;

Call Blocking Configuration Examples

http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#con11

Reject Calls

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml#reject

Cheers!

Rob

[simonmossman]

Thanks Rob

I did not think there were any changes to the rule

Have a good weekend

Simon