Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Block internal calls on CME

Is there anyway to block internal calls on CME?

For example, phone 1000 no call to phone 1001 in same Router.

1 ACCEPTED SOLUTION

Accepted Solutions

Block internal calls on CME

Hi

Yes , i have already shared with u all links for COR and i provided u with two solution one for COR and other for after hours.

Thank you

Please rate all useful information

5 REPLIES

Re: Block internal calls on CME

Hi

You can do it by using COR , Please find the below link:-

http://www.cisco.com/image/gif/paws/42720/configuring-cor.pdf

http://www.hh.se/download/18.70cf2e49129168da015800092952/4_11_Class_of_Restriction.pdf

Thank you

Please rate all useful information

Re: Block internal calls on CME

Hi

I have configured below some solutions , i hope all help you:-

1-

voice translation-rule 1

rule 1 reject /1000/

voice translation-profile REJECT

translate calling 1

Then go to the ephone-dn (which has number 1001) . The below configuration based on your IOS.

ephone-dn  50

     number 1001

     translation-profile incoming REJECT

or

ephone-dn  50

     number 1001

     translate calling REJECT

2-

telephony-serv

  after-hours block pattern 1 1000  7-24

Then under ephone with DN other than 1001 configure  after-hours exempt CLI.This will block only 1001 , when you enable after-hours exempt under other phones this will allow other phones calls 1000.

Thank you

Please rate all useful informaion

Community Member

Re: Block internal calls on CME

Hi Islam,


Some solutions with COR ?

Thanks.

Block internal calls on CME

Hi

Yes , i have already shared with u all links for COR and i provided u with two solution one for COR and other for after hours.

Thank you

Please rate all useful information

Community Member

Re: Block internal calls on CME

Islam

Thanks

242
Views
9
Helpful
5
Replies
CreatePlease to create content