Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Block unwanted inbound phone numbers CUCM 6.1

Is there anyway in the CUCM 6.1 to block inbound phone numbers? The receptionist is answering many unwanted phone number and they are requesting us to block those numbers.

If this is not an option in CUCM 6.1, is there other solution, such as in the gateway?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Block unwanted inbound phone numbers CUCM 6.1

Hello,

If the calls you want to block are coming in through an H.323 gateway, then this would be possible using translation rules. If you are using an MGCP gateway, then CUCM has no way to screen calls based on calling party number.

Hope that helped, if so please rate.

5 REPLIES

Re: Block unwanted inbound phone numbers CUCM 6.1

Hello,

If the calls you want to block are coming in through an H.323 gateway, then this would be possible using translation rules. If you are using an MGCP gateway, then CUCM has no way to screen calls based on calling party number.

Hope that helped, if so please rate.

Community Member

Re: Block unwanted inbound phone numbers CUCM 6.1

Hi,

It is coming in through an H.323 gateway. Is there any instruction somewhere?

Re: Block unwanted inbound phone numbers CUCM 6.1

Try this configuration:

config t

voice translation-rule 1

rule 1 reject /number you want to block/

rule 2 reject /number you want to block/

etc, etc

voice translation-profile BLOCK

translate calling 1

voice-port x/x/x:23 (assuming you have PRI)

translation-profile incoming BLOCK

Hope that helped, if so please rate.

Community Member

Re: Block unwanted inbound phone numbers CUCM 6.1

Thank you,

is there a way if we can do it in the CUCM not in the gateway?

Re: Block unwanted inbound phone numbers CUCM 6.1

Unfortunately no, this must be done in the gateway itself.

Hope that helped, if so please rate.

604
Views
0
Helpful
5
Replies
CreatePlease to create content