Im having a problem with certain users accidentally calling 911. I have a route pattern setup for blocked calls and for 911 call currently and the pattern is 9.@ for both that then routes to a route filter that has the following setup...
(TRANSIT-NETWORK-ESCAPE DOES-NOT-EXIST AND LOCAL-DIRECT-DIAL DOES-NOT-EXIST AND SERVICE == 911)
(AREA-CODE == 976) OR (AREA-CODE == 900) OR (OFFICE-CODE == 976)
Now what I am trying to do is block the pattern "91911" but still allow "9911" and "911" to be called. I tried adding the area code "911" to the blocked call filter but it didnt work, and Im guessing because it already hit the 911 filter. Is there a way to do this? If I need to provide more info please let me know.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.