We have CCM 6.0.1 and I want to hide the DN of a device when the user makes a call. Is the information displayed on the called party's phone from the Directory Number Information area in the Directory Number Configuration page?
If not how do you hide the calling party's number?
that could still work but you would need to create a translation pattern that is a perfect match for the number you want to dial and then on the CSS make sure the partition of the TP is above the one for the real phone.
configure the line phone withe the css private and normal particion. configure translation pattern with particion private and CSS normal.
put the name xxxx to your translation patter in the Calling Party Transform Mask you can put the DN that you want to show or you can choose in the Calling Line ID Presentation the RESTRICTED option that way the ip phone does not show any number and ready.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...