Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Blocking incoming calls on CM 4.1(3)

Is there anyway I can block a incoming call from a particular number. What would I need to do to prevent incoming calls from 973-xxx-xxxx? Is this possible with CM?

5 REPLIES
New Member

Re: Blocking incoming calls on CM 4.1(3)

It is possible if the call comes in on an H.323 Gateway. Not if the GW is MGCP, though.

Bronze

Re: Blocking incoming calls on CM 4.1(3)

It is coming over H323...what woud I need to do?

New Member

Re: Blocking incoming calls on CM 4.1(3)

It is possible if the call comes in on an H.323 Gateway. Not if the GW is MGCP, though.

Re: Blocking incoming calls on CM 4.1(3)

It is not possible to do this with CCM, but as already stated you can do it with your H.323 Gateway, try the following:

Use Translation rules:

config t

voice translation-rule 1

rule 1 reject /#/

rule 2 reject /#/

*where # is the number that you wish to block.

config t

voice translation-profile BLOCK_NUMBER

translate incoming 1

Assign this translation profile to the incoming dial-peer that you are using.

Hope that helps, if it does please rate the post.

//Jorge

Hall of Fame Super Gold

Re: Blocking incoming calls on CM 4.1(3)

Hi, in the example above, it should be:

voice translation-profile BLOCK_NUMBER

translate calling 1

117
Views
5
Helpful
5
Replies