Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Blocking outgoing call based on Calling Number

hi,

we have a central call manager and up to 10 SRST sites connected.

I would like to block Some  users from dialling outside number starting with 901xxxxx .But due to some techincal reasons i can not do this from our call manager,so it has to be from the site router.

My requirement is, i need to block users whose extensions are 123X from dialling outside number 9 01 xxxxxxxx,using translation rule or any other method,from the voice gateway (h323)router.

can anybody tell me how to solve this...

regards.

Renypmukku.

1 REPLY
Hall of Fame Super Gold

Blocking outgoing call based on Calling Number

You can use answer-address to match an incming dial-peer then apply COR or a translaton-rule.

the technique is the same as:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

263
Views
0
Helpful
1
Replies