05-15-2007 12:27 PM - edited 03-14-2019 09:30 PM
Has anyone setup a Bogen with Callmanager Express? If so, did you use a FXO or FXS card to connect. Did you have to use a TAM B? Any help would be greatly appreciated.
I currently have it plugged into a FXO port with the other end connected to the TIP and RING. The speaker is then connected to 70V connection.
Thanks
Solved! Go to Solution.
05-15-2007 01:05 PM
A loopstart Fxo trunk (default) should work.
http://www.bogen.com/support/productcatalog/pdfs/catalog.pdf
They do say in this link that interface a telephone trunk to the amplifier requires a trunk interface adapter like TAMB.
05-15-2007 12:34 PM
What model from Bogen are you using?
05-15-2007 12:36 PM
It's a TPU-15A with a SPT15A loud speaker.
Thanks
05-15-2007 01:05 PM
A loopstart Fxo trunk (default) should work.
http://www.bogen.com/support/productcatalog/pdfs/catalog.pdf
They do say in this link that interface a telephone trunk to the amplifier requires a trunk interface adapter like TAMB.
05-15-2007 01:31 PM
Sounds good. I have also opened a support case with Bogen and will update if I find out any new information.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: