Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Bogen TPU-15A Paging Callmanger Express

Has anyone setup a Bogen with Callmanager Express? If so, did you use a FXO or FXS card to connect. Did you have to use a TAM B? Any help would be greatly appreciated.

I currently have it plugged into a FXO port with the other end connected to the TIP and RING. The speaker is then connected to 70V connection.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Bogen TPU-15A Paging Callmanger Express

A loopstart Fxo trunk (default) should work.

http://www.bogen.com/support/productcatalog/pdfs/catalog.pdf

They do say in this link that interface a telephone trunk to the amplifier requires a trunk interface adapter like TAMB.

4 REPLIES

Re: Bogen TPU-15A Paging Callmanger Express

What model from Bogen are you using?

New Member

Re: Bogen TPU-15A Paging Callmanger Express

It's a TPU-15A with a SPT15A loud speaker.

Thanks

Re: Bogen TPU-15A Paging Callmanger Express

A loopstart Fxo trunk (default) should work.

http://www.bogen.com/support/productcatalog/pdfs/catalog.pdf

They do say in this link that interface a telephone trunk to the amplifier requires a trunk interface adapter like TAMB.

New Member

Re: Bogen TPU-15A Paging Callmanger Express

Sounds good. I have also opened a support case with Bogen and will update if I find out any new information.

Thanks

536
Views
0
Helpful
4
Replies
CreatePlease to create content