Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

BRI interface not showing in show voice port summary

Hi,

I have a 2901 with a VIC3-2FXS/DID and a VIC2-2FXO cards.

These two cards work ok.

I bougth a WIC-1B-S/T-V3  to replace the FXO.

There are no voice ports showing for the BRI card after i installed it.

What am i doing wrong or what do i need to enable the voice ports for BRI?

Thank you,

laszlo

1 ACCEPTED SOLUTION

Accepted Solutions
Green

BRI interface not showing in show voice port summary

Hi

Your WIC-1B-S/T-V3 card is a DATA WAN element it does NOT support voice.

You will need to consider a VIC2-2BRI-NT/TE

For voice working

Regards

Alex

Regards, Alex. Please rate useful posts.
1 REPLY
Green

BRI interface not showing in show voice port summary

Hi

Your WIC-1B-S/T-V3 card is a DATA WAN element it does NOT support voice.

You will need to consider a VIC2-2BRI-NT/TE

For voice working

Regards

Alex

Regards, Alex. Please rate useful posts.
276
Views
0
Helpful
1
Replies
CreatePlease to create content