Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

BRI MGCP issue with Callmanager 6

Hi,

have tried to set up an MGCP gateway with 2 x VIC2-2BRI-NT/TE cards.

all is ok, except when I try to configure the individual ports.

I am unable to select a protocol from the BRI Protocl drop down box within the Interface Information section. All that is available is -- Not Selected --

I am looking to select BRI-NET3 but it is not there!!!

any ideas?

N.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: BRI MGCP issue with Callmanager 6

.9901 means next release, i just checked the bug and it has been updated

Fixed-In

6.1(2.9901.59)

7.0(0.39700.127)

7.0(0.66666.1)

7.0(0.66666.2)

7.0(1.11000.2)

7.1(0.98999.7)

6.1(2.1122.1)

last ES available at CCO is

UCSInstall_UCOS_ES_6.1.2.1112-2.sgn.iso

so you'll have to log a TAC case to get the ES you need.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
4 REPLIES
Cisco Employee

Re: BRI MGCP issue with Callmanager 6

maybe this bug??

CSCsq38457

Unable to select the BRI protocol for the BRI interface in CUCM

Symptom:

Unable to select the BRI protocol for the BRI interface in CUCM

Conditions:

Issue is observed for c2801 configured for MGCP control.

There is no option to add the BRI protocol for the BRI interface in CUCM.

This is observed for CCM 6.1.1 and 6.1.2. Issue was not observed for CCM version 4.2 and 5.1.3

Workaround:

None

Fixed-In

6.1(2.9901.59)

7.0(0.39700.127)

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: BRI MGCP issue with Callmanager 6

My version is 6.1.2.1000-13 and it is indeed a 2801 ISR.

To upgrade to 6.1(2.9901.59), is this a reinstall?

Regards

N.

Cisco Employee

Re: BRI MGCP issue with Callmanager 6

.9901 means next release, i just checked the bug and it has been updated

Fixed-In

6.1(2.9901.59)

7.0(0.39700.127)

7.0(0.66666.1)

7.0(0.66666.2)

7.0(1.11000.2)

7.1(0.98999.7)

6.1(2.1122.1)

last ES available at CCO is

UCSInstall_UCOS_ES_6.1.2.1112-2.sgn.iso

so you'll have to log a TAC case to get the ES you need.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Cisco Employee

Re: BRI MGCP issue with Callmanager 6

Hi

The Prerequisites here might clarify some things as well

http://www.cisco.com/en/US/docs/ios/voice/cminterop/configuration/guide/

vc_mgcp_bri_sig_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1

057714

240
Views
5
Helpful
4
Replies