Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

bri problem please answer as fast as possible

i have customer that have bri line (sure this line has 2 channel)

ineed to know :

1- is this line have one number(like 25581513) or two numbers

2-this line has 2 channel and i need to forward the incoming call on that line to 2 different extension but the problem is that i am only have one single voice port that i may make connection plar on it so iwant to know if i can create a virtual voice port under it or not

3- my actual problem is that i need to use fax so i need to forward the incoming call call to fax and reception how can i do that

  • IP Telephony
1 REPLY
Hall of Fame Super Gold

Re: bri problem please answer as fast as possible

If you have a single number you cannot send the call to different extension, because the called number is always the same.

If you have two or more numbers, configure a translation-rule or ephone-dn secondary so that the called number matches where you want to send the call. Same for an fxs port, use destination-patter same as called number. With this configuration, you don't need anymore connection plar under voice-port.

Hope this helps, please rate post if it does!

94
Views
0
Helpful
1
Replies
This widget could not be displayed.