Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

bri - zetafax

I am connecting a zetafax server to callmanager (4.1.3) trought an isdn bri card and a voice gateway and I am having vaious problems:

1- the gateway is configured as mgcp gateway in the ccm because it has 3 e1 connected that we are using backhauled to the callmanager. If I try to configure the bri interface as backhaul I get an error and I can not set the isdn in "MULTIPLE_FRAME_ESTABLISHED", I solved it by not configuring the bri card as backhauled interface:

"interface BRI0/3/0

no ip address

isdn switch-type basic-net3

isdn protocol-emulate network

isdn layer1-emulate network

isdn incoming-voice voice

isdn skipsend-idverify

line-power

end"

I have configured a dial-peer to one extension pointing to the bri port.

2- with csim I can send a call to the zetafax server but I can not send a call using an Ip phone or the zetafax server

290
Views
0
Helpful
0
Replies
CreatePlease to create content