Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

British Telecom FXO disconnection

Hi,

Does anyone have the settings required for an FXO port using a BT phone line?

My FXO port is remaining offhook when calls have been disconnected...

Hope someone can help!

Thanks,

Peter.

4 REPLIES
Hall of Fame Super Gold

Re: British Telecom FXO disconnection

Look at this document:

http://cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

You can try the "dualtone midcall" approach with cptone uk, but ofen doesn't work and you still have to configure the frequencies explicitly.

Hope this helps, please rate post if it does!

New Member

Re: British Telecom FXO disconnection

Thanks for you reply,

I was hoping that someone might be able to tell me the exact frequency settings etc.

Someone here must have configured FXO for BT in the UK!

Please, I don't want to mess around too much trying different solutions, I've been here before and it was a slow process...just give me the commands! ;)

Thanks,

Hall of Fame Super Gold

Re: British Telecom FXO disconnection

Hope someone can fill in there with the exact settings. However in my experience there is no substitute for doing things yourself.

You can find the tones definitions at:

http://www.3amsystems.com/wireline/tone-search.htm

New Member

Re: British Telecom FXO disconnection

Thanks, I've got that page bookmarked! Its very useful.

I don't have too much time for testing unfortunately, hence the request for speedy results!

best regards,

Peter

111
Views
0
Helpful
4
Replies