I try to add ports for vg224 (sccp) thru bulk tool.
There is some post on forum but it seems that there is something missing.
1) I have created a gateway template named "0024CEF12F" (10 characters of MAC address)
2) setup first port 2/0/0 with device template named "AN0024CEF12F400" and line template named "line1"
3) tried to create CSV file using BAT.xlt under VG224 tab. The first field is "MAC address/Device Name" which only seems to accept 10 character MAC address. / this is what I don't understand! -do i need add ports under vg224 tab or under phone tab?If is under vg224 what mac addrese do i put (consider that i', using SCCP).SKWIG or AN ???
Please help!I need to provision 200 phones and I don't won't to do this manually :)
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.