Re: Bulk change of display activity settings for 7945/7965.
Yes, using the Bulk Administration Tool (BAT) you can accomplish this task. Go to Bulk Administs>Phones>Update Phones>Query. You can also run this task using a custom file if you prefer. If using the query method, add a search for device type that contains 7945.
Click on Find and then click on Next (if you have phones listed). If phones aren't listed, check your query. Ensure you are using "OR" when adding multiple filters to the "Find" clause.
In the Update Phones screen, scroll down until you see Product Specific Configuration Layout. You will find display settings here. Modify accordingly and proceed with scheduling and executing the bulk job. You will need to reset phones for the parameters to take affect.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...