I am building a CUP 8.6 lab and would like to get a better understanding of how to bulk setup end users for Jabber. I've outlined the steps I know I want to complete, and how I think they should be completed. Would you mind reviewing and letting me know what I can do better/easier? I want to make sure I've not missed any steps, or skipped over a better process. I cannot find a SRND describing this situation. Thanks!
1) Gather List of Existing Users and their associated DN
- Accomplished by BAT export
2) Create CSF Bulk Phone File for all existing users with their DN
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...