I suggest you to configure one 8961 with BLF/SD using the web interface, then export phones all details and verify which parameters have been setted to the phone you just configured. Now You should delete from the file all the phones which are not interested to this configuration and you can add or modify all other 8961 with the blf/sd informations in the same file and import It using:"phones -> insert phones -> Insert Phones All Details with check override the existing conf" be careful because you will overwrite all parameters of these phones, try the import on one phone, If everything good do the bulk for all.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4