I need to modify the Department of all mys users in Call manager 4.3. It seem the DCD Directory tools don't work. I was thinking of exporting my users with BAT, do the modification and import my users again. It seem, the export file structure is different than the import file structure.
Any idea how to do this (i have 800 users so manually doing it is a bad idea!)
Just do an export, modify it in excel to make a new import file. use BAT.xlt located on CCM. Also never modify ANYTHING through DCD, guarenteed you are going to mess something up beyond repair, and it wont even be from you doing anything wrong!!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...