Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
tka
Community Member

Bulk Voice Mail changing - Unity Connection

Is there a way to set a default Voice Mail Connection password for all users.As soon as the users dials the VoiceMail Hunt Pilot , he is asked to change his password.

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Bulk Voice Mail changing - Unity Connection

Hi Ramzi,

For Unity Connection the default password for users is setup in the VM Template that is used to create new users :)

Do the following procedure for user accounts, or for a template that you will use to create user accounts.

To Change a Phone (PIN) Password for an Individual User or Template

--------------------------------------------------------------------------------

Step 1 In Cisco Unity Connection Administration, find the template that you want to edit.

Step 2 On the Edit menu, click Change Password.

Step 3 In the Choose Password list, click Voice Mail.

Step 4 In the Password field, enter the new password.

Step 5 In the Confirm Password field, reenter the password to confirm.

Step 6 Click Save.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/user_mac/guide/2xcucmac040.html#wp1054468

Then check the option " User Must Change at Next Login" to force them to setup a new "personal" password.

Hope this helps!

Rob

3 REPLIES

Re: Bulk Voice Mail changing - Unity Connection

Hi Tka,

I think it will be as i do in unity 4.0,

It is when you create the subscriber,

He will be assigned the password configured in the user conf page

And in his first access to unity, he will be asked to change his password by default

Wish this be helpful

tka
Community Member

Re: Bulk Voice Mail changing - Unity Connection

Hi ,

First ,thansk for your reply

Actually, I'm talking about Unity Connection and not Unity so the concept of Subscriber is inexistant

regards,

Hall of Fame Super Red

Re: Bulk Voice Mail changing - Unity Connection

Hi Ramzi,

For Unity Connection the default password for users is setup in the VM Template that is used to create new users :)

Do the following procedure for user accounts, or for a template that you will use to create user accounts.

To Change a Phone (PIN) Password for an Individual User or Template

--------------------------------------------------------------------------------

Step 1 In Cisco Unity Connection Administration, find the template that you want to edit.

Step 2 On the Edit menu, click Change Password.

Step 3 In the Choose Password list, click Voice Mail.

Step 4 In the Password field, enter the new password.

Step 5 In the Confirm Password field, reenter the password to confirm.

Step 6 Click Save.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/user_mac/guide/2xcucmac040.html#wp1054468

Then check the option " User Must Change at Next Login" to force them to setup a new "personal" password.

Hope this helps!

Rob

327
Views
0
Helpful
3
Replies
CreatePlease to create content