I cant remember what causes this, but I have a cucm 6.1 with 7961 phones. New out of the box, they start the upgrade process to my 6.1 and then come back up with the bullseye looking graphic in the lower corner of the screen. (normally see the check mark box)
i wish it was that easy. Its on CUCM 6.1. I now remember I had this problem with the TFTP server dropping packets. The NIC card was mismatched with the port. As soon as I fixed the NIC card, the TFTP server started to work fine and phone loads worked.
Im still not sure what the technical term for "bullseye" in to search for.
We had this same issue today as well. In our case, the cable drop apparently has issues. I'm suspecting either a pierced/skinned cable or possibly it's not data grade cable. Once the phone started doing this, I moved it to a known good location and it continued the same behavior.
Performing the reset function as described above (in my case, we found that an external power cube was not required...works just fine doing it with a POE connection). This cleared what apparently was a corrupted load and the phone came up loaded, rebooted, and registered correctly.
So in addition the the reset, I would add that you should move the phone to a KNOWN GOOD connection when doing the reset. Customer had attempted this previously, but had not moved it to a known good location. Moving it made all the difference.
Tried the 1 2 3 4 5 6 7 8 9 * 0 # reset - no luck. Rebooted - bullseye again, failed to register.
Next tried 3 4 9 1 6 7 2 8 5 0 * #. Both indicators flashed alternate red. After a few minutes it automatically rebooted it flashed alternate yellow for a few seconds then goes to a blank LCD screen not even a bullseye.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...