11-07-2013 10:54 AM - edited 03-16-2019 08:17 PM
Is it possible to set up two BE6K's in active/active configuration for CUC 9.1?
Solved! Go to Solution.
11-07-2013 11:41 AM
+5 for Rob for correct answer.
Think about BE6K as a solution with individual applications, so the redundancy would be at the application level where they can be spread between 2 BE6K UCS servers.
Chris
11-07-2013 11:29 AM
Hey Pete,
Yes, this is supported
Note
The Connection cluster feature is supported for use with Cisco Unified Communications Manager Business Edition 6000, however, it is not supported with Cisco Unified Communications Manager Business Edition 3000 and Cisco Unified Communications Manager Business Edition 5000.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/design/guide/9xcucdg060.html
Cheers!
Rob
"Why do the best things always disappear "
- The Band
11-07-2013 11:41 AM
+5 for Rob for correct answer.
Think about BE6K as a solution with individual applications, so the redundancy would be at the application level where they can be spread between 2 BE6K UCS servers.
Chris
11-07-2013 12:19 PM
Thank you both for the quick response. I had a readup on the CUC 9.x clustering, and found this line about the CUC publisher responsibilities.
Homing and publishing the database and message store, which are both replicated to the other server.
thats the piece I couldnt get a handle on.
thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide