Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

'Busy' indicator on 7915-24,

Hi all,

I have receptionist with 7961 + 7915-24. Some of the internal DNs are also shown on 7915-24 buttons. How do I allow the actual users make call and have the respective button on 7915-24 indicate busy or button change color to indicate in used. Can this be achieve? Please assist and advise.

Best regards,

Lawrence Chew

1 REPLY

'Busy' indicator on 7915-24,

If I follow what you are asking, the 7915 will do this "by default". The button changes color depending on line state:

1. Dark (no light/color): Line available

2. Green, steady: Line in use

3. Red, steady: Line in use on a different station (shared line appearance)

4. Amber, flashing: Line is ringing

5. Green, flashing: Line is on hold

HTH.

Regards,

Bill

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

210
Views
5
Helpful
1
Replies
CreatePlease to create content