C200 M2 - Make the Beeping Stop

[jeffmastry]

Our C200 M2 has a failed drive (replacement on the way). How do I make this thing stop beeping in the meantime? It's driving everyone insane.

[ruvreve19]

Having the same issue.  TAC said the only way was to reboot the server and change one of the options.

[Anthony Holland]

Hi, I have one of these servers doing the same thing. Going to call it in, but what/where is the setting to make it stop, not seeing it in BIOS and wondering if it's somewhere else. Thanks!

[jpm122]

The audio alarm setting is normally in the onboard config of the RAID controller, which is accessible using some keyboard combination during server bootup (after BIOS, before OS loads).

[Anthony Holland · Accepted solution]

Yep, Thanks for the reply. I finally found the answer here: http://www.cisco.com/en/US/products/ps10493/products_tech_note09186a0080c0e461.shtml

Protip: remember to hit next under the controller properties to get to the screen where you can disable the alarm.

Silence is golden! lol

Thanks guys

[Rob Huffman]

Thanks for posting back Anthony +5

This will likely save some migraines out there.

Cheers!

Rob

"A smile relieves a heart that grieves" 

- Stones