i have a question for using cac in a specific scenario:
i have a HQ and a branch office BR with sip phone 8941, interconnected with WAN link.
it's a 1Mb/s WAN link with qos 2xG711 communications reserved (160kb/s reseved, used dscp 46) for the two site.
if there aretwocommunications between the two sites, it's ok, the voice mark is paket with dscp 46 and is prioritized, and the third communication is block with cac.
my problemis this, if the phone call with vidéo (2 communication with G711 codec for voice => 160k for voice and use dscp 46), the reserved bandwidth of the wan is use, but i can do two additionalvoice callsbecausevideo callsare notaccountingwith the voice calls in the cac.
how i can block voice calls, if there are two video calls? or accounting the voice traffic G711 of the video calls in the audio bandwidth of the cac?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...