cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
260
Views
0
Helpful
2
Replies

Call Admission Control

ragulan_dms
Level 1
Level 1

Hi,

I just want to know how to use the CAC in the following scenario,

HQ is device are into a device pool and Branch office put into a different device pool. A user belongs to HQ visit Branch office and uses his softphone at the branch office. Even though the user in the Branch office softphone register with the HQ device pool. In this case CAC will not reduct its bandwidth from the allocated bandwidth if the user uses the softphone to call HQ extension. In this scenario How to over come this issue?

Thanks

2 Replies 2

chiawong
Level 1
Level 1

Hi

You may want to look at device mobility if you are using a relatively current version of CUCM. See url below:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/devmobil.html

hi Chai Wong,

Thanks for the link. Since i was familiar with only CCM 4.1 and less i was not aware about the device mobility feature.

Thanks a lot for the information.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: