Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Call back to recieved Call - Dialing 9 Problem

Hi,

I have IP telephony setup includes callmanager 4.3 with IP phones and 2811 as voice gateway.

I configured digit 9 to make offnet calls now the problem we are facing when someone from pstn call on DID number, calling number saves in received calls. User can not dial that number directly because of that 9 digit.

Please suggest me the solution for this i believe this topic would already discussed but i couldn't find any post on it.

Waiting for immediate response.

Best Regards

Rameez

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Call back to recieved Call - Dialing 9 Problem

Hi Rameez

the following link will give u a nice step by step solusion to ur problem

Add Prefix to the Missed Call Number

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml

good luck

if helpful Rate

1 REPLY

Re: Call back to recieved Call - Dialing 9 Problem

Hi Rameez

the following link will give u a nice step by step solusion to ur problem

Add Prefix to the Missed Call Number

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml

good luck

if helpful Rate

98
Views
0
Helpful
1
Replies