Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Call Blocking

How do I block incoming calls to our IP Telephony, Cisco

4 REPLIES
Cisco Employee

Re: Call Blocking

call blocking based on ANI can only be done using H323

you need to provide more info

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Call Blocking

It is H323, we are receiving calls from 8776421263 that we want to block. The call sare coming into a DID for a user that wanrts this blocked, what to do ???

Re: Call Blocking

First, create a translation rule that will identify the incoming call:

voice translation-rule 1

rule 1 reject /8776421263/

Then associate it with a translation profile:

voice translation profile call_block_profile

translate calling 1

Then place that translation profile into your inbound dial-peer. It you don't have one defined, create one using the incoming called-number dial-peer command, as so:

dial-peer voice 111 pots

incoming called-number .

call-block translation-profile incoming call_block_profile

call-block disconnect-cause incoming invalid_number

The call-block command allows the gateway to give a disconnect message rather than just a fast busy.

New Member

Re: Call Blocking

Sweet I was stuck at the voice trans profile...Thanks, I'll give her a try.

503
Views
5
Helpful
4
Replies
CreatePlease to create content