i have a 7204vxr (test branch office) connected to another 7204vxr (production) via a ppp t-1. the 7204 test branch doesnt have any connectivity to the pstn but the production 7204 has 2 pri's.
i want to be able to make offnet calls from the test branch through the production 7204 via the 2 pri's. i can currently make on net calls but as soon as i dial "9" from the test branch to get an outside line i hear "call can not be completed as dialed." i have a voip dial-peer pointing to one of my call managers and i added another voip dial-peer with a destination pattern of 9T pointing at the production 7204 but it didnt work - same error message.
any hints would be great. i know this isnt a normal configuration.
1. i dont have a route pattern on the test branch. i attempted to use a dial-peer pointing to the production gateway. i also dont have a ccm at the test branch yet - maybe not ever. i would like to configure the test branch to be able to call pstn with out a ccm onsite.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...