PBX CDR output ----> 3rd party software captures output reformats it and outputs it to ----> Billing software
I have been trying to setup CDR logging to a syslog server for over a week now with no success, all I want to do is capture the CDR output from the CME router so I can show the sample to the 3rd pary developer to see if they can modify there software to capture it.
There is not much help regarding setting up logging CDR output on ciscos site.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...