Call Disconnect after 30Min

[Ralf.Bopp]

Hello,

a costumer has an analog phone connected to an ata186.

When he is calling out and the call lasts longer den 30Min , the call gets automaticaly disconnected.

The IP-Phones work without problems.

Is there a timer which disconnects calls after a period of time, especially for ata's ?

I found a maximum call duration timer, but that timer is set on 360Min.

Thanks for help

[jeckert]

I just configured it with the same number as the 1st port.

[j.mccartney]

Thanks for the reply, I found out in my case the problem was related to the firmware of the ATA. I upgraded it to 3

.2.4 and it works great now. Thanks again.

[garg.atul]

Try increasing the tcp timeout at PIX if it is in between.