What do you mean by "display restriction". Are you talking about modifying a translation pattern to restrict the connected/called party information? Could you give some additional info about what you are trying to accomplish with the restrictions?
Yes I am blocking the calling and connected number to the extension when a caller calls my extension 2096 it show private on there end and no number for the connected. I have a translation pattern that matches on 2096 that is in there partition which allows them to call it. The calls rings my phone shows there calling information, rings 4 times then should go to my voice mail box. That is were the issue is, it goes to the general voice mail box because it is not seeing that it is coming from 2096. If I change the connected line ID presentation on the 2096 translation pattern to allow it works correctly. But that defeats the purpose.
I am not able to reproduce this situation. I have a configuration like yours and when my calls are forwarded they are received by VM and integrated successfully. I have tried to remove voicemail profile, restricting calling/called, etc. Everything works.
So, either I am missing something in my test or there is some software defect amiss. In my test I used CUCM 7.1(3b)su2 and CUC 7.1(3b)SU2. What versions are you running?
I am using System version: 184.108.40.2062-1. I have 2 separtate partitions, my group in one and everyone else in another. I have the CS on the VM pilot set with both PT's. Of course it fails on outside calls coming into my extension as well. Does the exact same thing?
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...