My Customer have 03 sites. The site A the CallManager is with version 4.1.3 sr8 and Site B and C is with the version 3.1.3. When the call start the site A for Site B or C it's Ok, but, when the call start de Site B and C to Site A, the call fail. The phone ring but when the user hang up the telephone the call not completed. This different version can be the problem? The CallManager present the message error:
11/28/2008 14:53:32.096 Cisco CallManager|MediaManager - ERROR wait_AuConnectErrorInd - only (1) MediaExchange that reported error...going away.|<CLID::CTAW2CM1-Cluster><NID::172.19.41.3><CT::2,100,71,300.1><IP::><DEV::>
11/28/2008 14:53:32.096 Cisco CallManager|ConnectionManager - wait_AuDisconnectRequest(33555187,33555188): NO ENTRY FOUND IN TABLE|<CLID::CTAW2CM1-Cluster><NID::172.19.41.3><CT::2,100,95,1.58387><IP::172.19.18.119><DEV::SEP0002B9EB0656
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...