Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call flow between two cisco phones

Hello,

If I have two  phones that use dtmf in band. if Phone 1 is one site and Phone 2 is another site that go thru the mpls cloud. Say you dial from phone 1 to phone 2 how does call initiate go from one phone to another phone what's is the process. Like is cucm or another device involved or is it an endpoint to endpoint connection. How does phone 1 know where to send rtp to phone 2 and how is dtfm use to determine where to send the call to?

  • IP Telephony
2 REPLIES

Call flow between two cisco phones

in cucm world, phones are dumb endpoints with very little intelligence. setting up a call between two phones, be it between two locations or not, is 100% orchestrated by cucm (using sip or sccp to signal to and from phones). Cucm will provide the IP address of phone2  to phone 1 and vice versa. This way the phones set up RTP. Phones have no knowledge of each other, all dial plan and feature logic is situated on cucm.

=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

============================= Please remember to rate useful posts, by clicking on the stars below. =============================

Call flow between two cisco phones

Please see attached pictures for a brief explaination or example as per your question.

Voice CCIE #37771

Voice CCIE #37771
143
Views
0
Helpful
2
Replies
This widget could not be displayed.