We have two Cisco Unifed Communication clusters ( version : 8.6.x) connected via E1 PRI (cucm1--PriGw1--PriGw2--Cucm2). Either cucm cluster connected to PSTN as well. There is a Cisco Unity Connection on Cluster2.
There is some call flow that I want to learn it is possible to doing and how to doing this issue.
1) When call comes from PSTN to phone 2 (in cluster2)
* if phone 2 is not register call will forward to phone1 (on cluster 1). If phone 1 will register there is not problem and call will forwarded. But if phone 1 is not register call will forwared to voicemail.
*if phone 1 is not register call will forward to phone 2 (on cluster 2). If phone 2 will register there is not problem and call will forwarded. But if phone 2 is not register call will forwared to voicemail.
My aim is will forward call acording to source. Especially if calls come from pstn call will forwarded to other cluster but if call come from other cluster call will forwarded to voice mail(during phone not register)
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...