Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call Forward All On CME 7.0

I have a UC520 with CME 7.0. Some of users configure Cisco 7975 phones call forward all to another internal extension. This call forward all work when IP phone call IP phone, however it doesn't work when PSTN call to the IP phone that set call forward all?

I have another CME 4.3 also same behaviour call forward all not working for PSTN incoming call.

Does call forward all support incoming PSTN call?

5 REPLIES

Re: Call Forward All On CME 7.0

Try this:

telephony-service

transfer-pattern .T

-nick

New Member

Re: Call Forward All On CME 7.0

I already have this transfer-pattern .T command however still doesn't work.

Do I need this command

call-forward pattern pattern

Re: Call Forward All On CME 7.0

You may need that as well - that is for SIP/H323 transfers.

-nick

Hall of Fame Super Gold

Re: Call Forward All On CME 7.0

Likely a plan&type issue.

Under isdn interface, configure isdn map address . plan unknown type unknown

New Member

Re: Call Forward All On CME 7.0

Thank you so much. I wil try tomorrow.

276
Views
0
Helpful
5
Replies