10-15-2010 06:12 PM - edited 03-16-2019 01:22 AM
I am trying to setup call-forward noan so when we go in SRST and the DID is doesn't answer we send it to a mobile
phone number. What commands do I need and or can I do that?
10-15-2010 10:18 PM
sorry I posted config which is different scenario, i didn't realise you were asking for the no-answer scenario.
In fact it's an easy one, you can configure this under the call-manager-fallback config, using the alias command. I'll give you more specifics if you need, tomorrow.
10-15-2010 11:50 PM
Is there any way to get it today by chance?
10-17-2010 09:55 PM
sorry for the delay, try this:
For example your cell phone number is: 516-555-3232
Call-manager-fallback
call-forward noan 915165553232 timeout 10
Make sure you have the following dial-peer
Dial-peer voice 1010 pots
destination-pattern 91[2-9]..[2-9]......
prefix 1
port 0/1/0:23
Where 0/1/0 is your T1/E1 controller Port.
Hope this helps,if it does, please rate.
Cheers!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide