Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Call-Forward NOAN

I am trying to setup call-forward noan so when we go in SRST and the DID is doesn't answer we send it to a mobile

phone number. What commands do I need and or can I do that?

3 REPLIES
Community Member

Re: Call-Forward NOAN

sorry I posted config which is different scenario, i didn't realise you were asking for the no-answer scenario.

In fact it's an easy one, you can configure this under the call-manager-fallback config, using the alias command. I'll give you more specifics if you need, tomorrow.

Community Member

Re: Call-Forward NOAN

Is there any way to get it today by chance?

Community Member

Re: Call-Forward NOAN

sorry for the delay, try this:

For example your cell phone number is: 516-555-3232

Call-manager-fallback

call-forward noan 915165553232 timeout 10

Make sure you have the following dial-peer

Dial-peer voice 1010 pots

destination-pattern 91[2-9]..[2-9]......

prefix 1

port 0/1/0:23

Where 0/1/0 is your T1/E1 controller Port.

Hope this helps,if it does, please rate.

Cheers!

499
Views
0
Helpful
3
Replies
CreatePlease to create content