Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call forward on fxs

Hi I have a client with a UC540, who wants to divert incoming calls to an external number. The problem is that when the client makes this divert the caller hears a tone, ten seconds of silence and more tones (the external number does not start ringing until these last ten seconds.). The lines are fxs. How i  could reduce that time?

  • IP Telephony
10 REPLIES
Green

Call forward on fxs

Hi,

This sounds like you are using the default inter digit timer of 10 secs

Try adjusting this

on cli config

!

telephony-service

timeout interdigit 4

!

HTH

Alex

Regards, Alex. Please rate useful posts.
New Member

Call forward on fxs

thanks for the reply, but i have a timeout interdigit 5. Another idea?

Green

Re: Call forward on fxs

Hi,

Can you post the config

Show run

Can you also state the FXS port  and the forwarded number

Regards

Alex

Regards, Alex. Please rate useful posts.
New Member

Re: Call forward on fxs

Here is the shrun

Green

Re: Call forward on fxs

Hi,

I am assuming that the outgoing call forward goes to the PDTN via the FXO ports

Can you add

!

voice-port 0/1/0

timeouts interdigit 5

!

!

voice-port 0/1/1

timeouts interdigit 5

!

!

voice-port 0/1/2

timeouts interdigit 5

!

!

voice-port 0/1/3

timeouts interdigit 5

!

HTH

Alex

Regards, Alex. Please rate useful posts.
New Member

Call forward on fxs

Yes, client only have two fxo lines. Inbound calls from analog pstn line are forwarded to analog gsm gateway conected to fxo port.

Green

Call forward on fxs

Hi,

Did adding the additional config help ?

Regards

Alex

Regards, Alex. Please rate useful posts.
New Member

Call forward on fxs

The problem persists. Could it be that the UC, look for line in all FXO ports?

Green

Call forward on fxs

What is the delay like when you dial direct to the target number

Regards

Alex

Regards, Alex. Please rate useful posts.
478
Views
0
Helpful
10
Replies
This widget could not be displayed.