My CCME 2901 is connected through trunk link h.323 to PBX Panasonic and PBX Pana is connected through ISDN/PRI30 line to ISP
Here is my diagram...
So, when i dial local number 1XX of Panasonic PBX, from CCME 2901 every thing is good, but if i try do dial number e.g - 101 that has forwarding rule - to another number, e.g 98XXXXXXXXXX or forwarding rule to CCME number , eg 770 - i've received a busy tone
I have the same problem in my network. I have a trunk between a panasonic-tda and CME. all calls are routed succesfully and both can call each other but when an extension in CME side has a call-forwarding rule, the calls from pana to that extension are failed. did you grant any success in solving your problem? I will be appreciated if you could provide me any help in this regard.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...