Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Call Forward to mobile unallocated/unassigned

Hey,

I am having issue with a customer. I have tried all possiblities. Manimpulating translation rules and tried the below link

http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a00800b48cb.shtml

but nothing worked.

Please find below the debug

Oct 18 09:20:46.976: ISDN BR0/0/1 Q931: RX <- RELEASE pd = 8  callref = 0x62

Oct 18 09:20:46.980: ISDN BR0/0/1 Q931: TX -> RELEASE_COMP pd = 8  callref = 0xE2

Oct 18 09:20:47.244: ISDN BR0/0/1 Q931: TX -> RELEASE pd = 8  callref = 0x69

Oct 18 09:20:47.344: ISDN BR0/0/1 Q931: RX <- RELEASE_COMP pd = 8  callref = 0xE9

Oct 18 09:20:49.940: ISDN BR0/0/1 Q931: RX <- SETUP pd = 8  callref = 0x63

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech 

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x82

Preferred, B2

Calling Party Number i = 0x1183, '447720742215'

Plan:ISDN, Type:International

Called Party Number i = 0xA1, '263793780'

Plan:ISDN, Type:National

Sending Complete

Oct 18 09:20:49.944: //-1/69BE0066807A/CCAPI/cc_api_call_setup_ind_common:

   Interface=0x2228E2C0, Call Info(

   Calling Number=447720742215,(Calling Name=)(TON=International, NPI=ISDN, Screening=Network, Presentation=Allowed),

   Called Number=263793780(TON=National, NPI=ISDN),

   Calling Translated=FALSE, Subscriber Type Str=RegularLine, FinalDestinationFlag=TRUE,

   Incoming Dial-peer=1, Progress Indication=NULL(0), Calling IE Present=TRUE,

   Source Trkgrp Route Label=bri, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=-1

Oct 18 09:20:49.948: ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x1 0x1, Calling num 00447720742215

Oct 18 09:20:49.948: ISDN BR0/0/0 Q931: Sending SETUP  callref = 0x006A callID = 0x806C switch = basic-net3 interface = User

Oct 18 09:20:49.948: ISDN BR0/0/1 Q931: TX -> CALL_PROC pd = 8  callref = 0xE3

Channel ID i = 0x8A

Exclusive, B2

Oct 18 09:20:49.952: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8  callref = 0x6A

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech 

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x89

Exclusive, B1

Calling Party Number i = 0x1183, '00447720742215'

Plan:ISDN, Type:International

Called Party Number i = 0xA1, '3409870403'

Plan:ISDN, Type:National

Sending Complete

Oct 18 09:20:50.232: ISDN BR0/0/0 Q931: RX <- CALL_PROC pd = 8  callref = 0xEA

Channel ID i = 0x89

Exclusive, B1

Oct 18 09:20:50.332: ISDN BR0/0/0 Q931: RX <- DISCONNECT pd = 8  callref = 0xEA

Cause i = 0x8281 - Unallocated/unassigned number

Progress Ind i = 0x8288 - In-band info or appropriate now available

Oct 18 09:20:50.336: ISDN BR0/0/1 Q931: TX -> DISCONNECT pd = 8  callref = 0xE3

Cause i = 0x8081 - Unallocated/unassigned number

Progress Ind i = 0x8288 - In-band info or appropriate now available

Oct 18 09:20:50.456: ISDN BR0/0/1 Q931: RX <- RELEASE pd = 8  callref = 0x63

Oct 18 09:20:50.456: ISDN BR0/0/1 Q931: TX -> RELEASE_COMP pd = 8  callref = 0xE3

Oct 18 09:20:50.460: ISDN BR0/0/0 Q931: TX -> RELEASE pd = 8  callref = 0x6A

Oct 18 09:20:50.568: ISDN BR0/0/0 Q931: RX <- RELEASE_COMP pd = 8  callref = 0xEA

-ITALY#u all

All possible debugging has been turned off

-ITALY#term no mon

-ITALY#e   config

Configuring from terminal, memory, or network [terminal]?

Could some one please shine some light on this issue

Please rate the post

Shibly Ibrahim

Please rate the post Shibly Ibrahim
Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Call Forward to mobile unallocated/unassigned

That dis not a cellphone number and you posted no trace.

To set plan / type use "isdn map ." command, not translation rule.

11 REPLIES
Hall of Fame Super Silver

Re: Call Forward to mobile unallocated/unassigned

Are you making international call?
If so you are missing intl prefix I.e. 00.
Can you post your config?

Chris

Sent from Cisco Technical Support iPhone App

New Member

Re: Call Forward to mobile unallocated/unassigned

Hey,

No its a mobile number locally. I called from the UK. Its italy and they dial mobile numbers without 0 beginnign with 3

Please rate the post

Shibly Ibrahim

Please rate the post Shibly Ibrahim
New Member

Re: Call Forward to mobile unallocated/unassigned

Please rate the post

Shibly Ibrahim

Please rate the post Shibly Ibrahim
Hall of Fame Super Silver

Re: Call Forward to mobile unallocated/unassigned

What if you massage your caller ID to a local Italian number?


Sent from Cisco Technical Support iPhone App

New Member

Re: Call Forward to mobile unallocated/unassigned

I tried translation-rule

rule 1 // /0263793780/

doesnt work i am not sure whats wrong

Please rate the post

Shibly Ibrahim

Please rate the post Shibly Ibrahim
Hall of Fame Super Gold

Call Forward to mobile unallocated/unassigned

For outgoign calls, set type/plan to unknow/unknown

New Member

Call Forward to mobile unallocated/unassigned

Hey Paolo,

Tried doesnt work

rule 2 // /0263793780/ type unknown unknown plan any isdn

Please rate the post

Shibly Ibrahim

Please rate the post Shibly Ibrahim
Hall of Fame Super Gold

Call Forward to mobile unallocated/unassigned

That dis not a cellphone number and you posted no trace.

To set plan / type use "isdn map ." command, not translation rule.

Call Forward to mobile unallocated/unassigned

Hi,

Call is being release from remote end.

Ask the remote end regarding there expectaiton for this called number and calling number digit and it's plan and type.

Try calling that mobile number directly from your side and check if its working?

Regards,

Nishant Savalia

Regards, Nishant Savalia
New Member

Call Forward to mobile unallocated/unassigned

Hey Nishant,

calling directly it works fine.

Please rate the post

Shibly Ibrahim

Please rate the post Shibly Ibrahim

Call Forward to mobile unallocated/unassigned

What plan and type you are sending while dialing directly? Is it the same of forwarded call?

Then please co-ordinate with remote party regarding disconnecting the forwarded call.

Regards,

Nishant Savalia

Regards, Nishant Savalia
1406
Views
0
Helpful
11
Replies
CreatePlease to create content