Call Forward & Voice Translation Rule not behaving properly !!
I have cme 7.1 i configured call-forward all & its working fine for internal & external users.
Problem : lets suppose i enable call forward all on extension A ( having extension 836) to my mobile, when any body from PSTN calls to Extension A the call is forwarding to my mobile but instead of getting my DID ( 17383836 ) on my mobile i m getting the Main Number of PRI on mobile ( 17383838 ).
Troubleshooting: I enabled debug isdn q931 & i saw that when i call to extension A ( which has call-forward all enable ) its calling party number shows me 1738333381821( 33381821 is the callers mobile number from PSTN ) .
As per my PRI provider they said for getting the correct DID on mobile you need to send me only eight digits along with extension.
Below is the debug isdn q931 & config of my translation rules:
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4