Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Call Forward

Hi,

I have 7940 with two lines:

from my phone if i click CFwall it only forward calls coming to my primary line, is it possible to do it from the phone for the other line.

Good day

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Call Forward

Hi Wissam,

This is a very common question all of us have asked at one point or another and currently cfwdall is only supported for Line 1 on the phone.The only method available to cfwdall Line 2 etc. is to do it from ccmadmin or the ccmuser web access page.

There is also a third party product called;

IPPhone callForwarder

This new version brings to the user the ability of defining and setting the call forwards from the IP Phone. When selecting the IP Phone callForwarder service, a menu with all available lines will appear. After selecting the line the user wishes to set the forward on, a new menu containing the forward definitions will show on screen. Only those forwarding parameters definied by the Administrator will be displayed. These parameters will show the actual forward destination. The user can then set any of these callForwards.

From this link at myvoipsource.org;

http://www.voip-tools.org/index.php?option=com_content&task=view&id=47&Itemid=85

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: Call Forward

Hi Wissam,

This is a very common question all of us have asked at one point or another and currently cfwdall is only supported for Line 1 on the phone.The only method available to cfwdall Line 2 etc. is to do it from ccmadmin or the ccmuser web access page.

There is also a third party product called;

IPPhone callForwarder

This new version brings to the user the ability of defining and setting the call forwards from the IP Phone. When selecting the IP Phone callForwarder service, a menu with all available lines will appear. After selecting the line the user wishes to set the forward on, a new menu containing the forward definitions will show on screen. Only those forwarding parameters definied by the Administrator will be displayed. These parameters will show the actual forward destination. The user can then set any of these callForwards.

From this link at myvoipsource.org;

http://www.voip-tools.org/index.php?option=com_content&task=view&id=47&Itemid=85

Hope this helps!

Rob

New Member

Re: Call Forward

hehe

it is funny, in the link you used voip-tools, but the right one is the one you wrote myvoicesource.org

Good day

New Member

Re: Call Forward

Hi,

Other solution in using CCMUser page

http://x.x.x.x/ccmuser

From the ccmuser page it's possible to do a CallFwd to the second line ;-)

Thanks

Regards,

--

Christophe

141
Views
0
Helpful
3
Replies