Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Call Forwarding - High Traffic

CUCM |IP Phone| Call forwarding to PSTN |mobile number| showing "High Traffic Try Again Later"!

12 REPLIES

Call Forwarding - High Traffic

What is your type of PSTN connection?

The number is correctly?

Only call forward thats not work?

Regards

Leonardo Santana

Call Forwarding - High Traffic

We have E1 PSTN connection...

The number is correct...

Internal call forward is working but call forward to PSTN |mobile|  is not working...

Thanks..

Hall of Fame Super Silver

Re: Call Forwarding - High Traffic

Is it H323? If so can you post your dual peer config?

Sent from Cisco Technical Support iPhone App

Call Forwarding - High Traffic

dial-peer voice 1 pots

translation-profile incoming VGW-in

incoming called-number .

direct-inward-dial

!

dial-peer voice 8000 voip

description System Extensions

destination-pattern 8...

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

!

dial-peer voice 7000 voip

description 7 Range Extensions

destination-pattern 71[349].

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

!

dial-peer voice 71380 pots

description ERP FAX

destination-pattern 7138T

port 0/3/0

!

dial-peer voice 20000 pots

trunkgroup Commscope

description Commscope Outgoing Lines

destination-pattern 9T

!

dial-peer voice 70000 pots

trunkgroup STC-BT

description BT Users-All Calls

destination-pattern 66T

!

dial-peer voice 80060 voip

description MeMega IVR

destination-pattern 8006

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

!

dial-peer voice 1759 pots

description POS Number for MeMega Showroom

destination-pattern 881759

port 0/3/1

forward-digits 4

!

dial-peer voice 1500 voip

description UCM Extensions

destination-pattern 1[154]..

session target ipv4:172.16.35.20

codec g711ulaw

!

dial-peer voice 6900 pots

description Nortel E1 Range

destination-pattern 69..

port 2/1:0

forward-digits all

!

dial-peer voice 70010 pots

description Outgoing MeMega All Users

destination-pattern 88T

port 1/0:0

!

dial-peer voice 7020 voip

destination-pattern 7001

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

!

dial-peer voice 15000 pots

description Outgoing for Cisco and Nortel Users

destination-pattern 55T

fax rate disable

port 1/0:0

!

dial-peer voice 5500 voip

destination-pattern 700T

session target ipv4:172.16.35.20

codec g711ulaw

!

dial-peer voice 5600 pots

destination-pattern 56T

port 0/2/0

!

dial-peer voice 70291759 pots

destination-pattern 7029T

port 0/3/3

!

dial-peer voice 70301759 pots

destination-pattern 7030T

port 0/3/2

!

dial-peer voice 70311759 pots

destination-pattern 7031T

port 0/3/1

!

dial-peer voice 70321759 pots

destination-pattern 7032T

port 0/2/2

!

dial-peer voice 7129 voip

destination-pattern 7129

session target ipv4:172.16.35.20

codec g711ulaw

fax-relay ecm disable

fax rate disable

!

dial-peer voice 7044 voip

description Memega FAX

destination-pattern 7044

session target ipv4:172.16.35.20

dtmf-relay rtp-nte

codec g711ulaw

!

  dial-peer voice 77770 voip

description Cisco Call Center Nortel

destination-pattern 7777

session protocol sipv2

session target ipv4:172.16.2.74

codec g711alaw

!

dial-peer voice 6992 voip

destination-pattern 6917

session target ipv4:172.16.12.202

session transport udp

voice-class codec 2

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none

no vad

dial-peer voice 550001 pots

forward-digits 4

!

dial-peer voice 90001 pots

destination-pattern 55.......,,,,,,,,,,T

fax rate disable

port 1/0:0

!

dial-peer voice 699251 pots

service faxd

shutdown

incoming called-number 6992

direct-inward-dial

!

dial-peer voice 66995522 voip

destination-pattern 6992

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

fax rate disable

!

dial-peer voice 699253 voip

service faxd

shutdown

incoming called-number 4555

!

dial-peer voice 719444 voip

destination-pattern 7199

session protocol sipv2

session target ipv4:172.16.35.20

dtmf-relay rtp-nte

codec g711ulaw

clid network-provided

!

dial-peer voice 7194 voip

description to microsoft communication server

destination-pattern 57....

session protocol sipv2

session target ipv4:172.16.100.111

session transport tcp

codec g711ulaw

clid network-provided

!

dial-peer voice 69055 voip

description to microsoft communication server Conference

translation-profile outgoing MSConference

destination-pattern 6905

session protocol sipv2

session target ipv4:172.16.100.240:5068

session transport tcp

dtmf-relay rtp-nte

codec g711ulaw

!

dial-peer voice 8794 voip

description BTAT IVR

destination-pattern 8794

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

!

dial-peer voice 6984 voip

description MVA for 7199

destination-pattern 6984

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

!

dial-peer voice 69840 pots

service ccm

incoming called-number 6984

direct-inward-dial

dial-peer voice 17777 pots

description POTS FOR DOKKI

destination-pattern 605........

port 0/1/1

forward-digits 10

!

dial-peer voice 18888 pots

description POTS FOR NILE CITY

destination-pattern 66T

port 0/0/1

forward-digits 10

!

dial-peer voice 6969 voip

description ERP Support 1600

destination-pattern 6969

session target ipv4:172.16.35.20

dtmf-relay h245-alphanumeric

codec g711ulaw

Hall of Fame Super Silver

Call Forwarding - High Traffic

Your destination-pattern destination-pattern 71[349]. is improperly formatted which will cuase this error (I know I've been there :-))

The syntex needs to be 71[3,4,9].

HTH, please rate all useful posts!

Chris

Call Forwarding - High Traffic

Chris

Your recommended solution seems to be not useful!

Call Forwarding - High Traffic

can you post the output of debug voice ccapi inout and your try to forward the call to cell phone number.

Regards

Leonardo Santana

New Member

Call Forwarding - High Traffic

hi Marlo,

Possible to do a debug isdn q931? is the call successful sent to the GW?

TIA

Call Forwarding - High Traffic

actually, we are using E1-CAS and debug isdn q931 is not supported, and when i used [terminal monitor | debug voice ccapi inout] commands ...strange..no output..

Re: Call Forwarding - High Traffic

Mario inside the Directory Number the CSS of Call Forward All has the permission to reach cell phones numbers route pattern?

Regards

Leonardo Santana

Call Forwarding - High Traffic

i checked the CSS and there is mobile access|privilege..

Re: Call Forwarding - High Traffic

Problem Solved :


Under CUCM H.323 Gateway Configuration:

Call Routing Information - Outbound Calls

Calling Party Selection* Originator

804
Views
0
Helpful
12
Replies
CreatePlease to create content