Hello - we see an occasional issue where a user turns on call forwarding and when they come back to the phone it has been turned off. It appears to be caused by interruptions in connectivity between the phone and call manager. Attendant Console still shows the phone as forwarded. We have brief and occasional network interruptions and it is disconcerting to the users to find their phones are no longer forwarding when the return. Is there some way to make this setting more "sticky"? Thanks!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...