Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Call Forwarding on CCME 7.x

Hello everyone,

On CCME 7.1 if I have a 7941G with 2 DNs on it should I be able to do a Call Forward all on both lines? The systems takes the command from the phone for both lines but te second line keeps ringing at the phone.

Thanks in advance. All replies rated.

5 REPLIES
Hall of Fame Super Gold

Re: Call Forwarding on CCME 7.x

No, you need to set CFA separately for each DN/button. For the second one, press line button (dialtone is heard), then press CfwAll and the destination number.

Please remember to rate useful posts with the scrollbox below.

Community Member

Re: Call Forwarding on CCME 7.x

Sorry that I wasn't clear before. I am doing a CFA on both lines. The phone even shows the second line as forwarded but the calls keep ringing through to the phone on te second line. It worked once then we reset the phone and it hasn't worked since

Hall of Fame Super Gold

Re: Call Forwarding on CCME 7.x

Which exact IOS are you running ?

Can you try reloading the router ?

Community Member

Re: Call Forwarding on CCME 7.x

c2800nm-adventerprisek9-mz.124-24.T.bin. We can try that but it's not gonna make anyone happy. Just to confirm: This SHOULD work correct? I remember in versions of CM gone past that you could only do a CFA on the primary DN

Hall of Fame Super Gold

Re: Call Forwarding on CCME 7.x

It must work. Please upgrade IOS while you're there, I like YB(latest) better than T(latest).

And, current CM still has the limitation because apparently Cisco likes to make customers upset.

128
Views
13
Helpful
5
Replies
CreatePlease to create content