We have CCM 6.X cluster and have 7960/7961 IP phones with 5 lines/buutons configured. I want to do a "Call Forward All" for the 5th line on the phone to a different number/extension. How can I achieve this directly through the phone.
I am aware that I can achieve this for the first line/button using "CFwdALL" softkey on the phone.But when I try for 5th button it gives error "That key is not active here".
I am also aware that this can be achieved by login to the phone through web using a ccm user id and configure a call forward all for the required line. But wanted to know if this can be achieved directly through the phone .
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...