Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Call from SCCP phone to H.323 port on VG224

I have a client that has a 2821 installed with a working T1 into the main campus PBX. They have a VG224 with one port configured as H.323 and the rest SCCP. They can point calls from this VG224 to the 2821 from this VG224 and can get calls back and forth. What they want to do is point an SCCP phone from the CallManager to the H.323 port on the VG224 to "hairpin" in the 2821 to avoid inbound and outbound T1's. Has anyone done such a thing?

  • IP Telephony
1 REPLY

Re: Call from SCCP phone to H.323 port on VG224

ok, add the vg as h323 gateway

and make the corsponding route-pattren and let it point to the vg

267
Views
0
Helpful
1
Replies
This widget could not be displayed.